Hello I have a Z750ATAPI 750MB Internal Zip Drive.
Drive is using an IDE to SATA converter.
I have read that some people use USB converters for this, but I do not wish to go that route.
Cannot seem to get Ubuntu to see it.
BIOS does detect upon boot.
Running 5.13.0-40-generic #45~20.04.1-Ubuntu
Drive is known to be working in last Windows machine it was in.
sda 8:0 0 223.6G 0 disk
└─isw_bggcabbigg_- RAID 253:1 0 447.1G 0 dmraid ├─isw_bggcabbigg_-RAID1 │ 253:0 0 512M 0 part /boot/efi └─isw_bggcabbigg_-RAID2 253:2 0 446.7G 0 part /boot
sdb 8:16 0 238.5G 0 disk
└─isw_bggcabbigg_-RAID 253:1 0 447.1G 0 dmraid ├─isw_bggcabbigg_-RAID1 │ 253:0 0 512M 0 part /boot/efi └─isw_bggcabbigg_-RAID2 253:2 0 446.7G 0 part /boot
sdc 8:32 0 1.8T 0 disk
├─sdc1 8:33 0 10G 0 part
├─sdc2 8:34 0 512M 0 part [SWAP]
├─sdc3 8:35 0 14G 0 part
└─sdc4 8:36 0 1.8T 0 part
sr0 11:0 1 1024M 0 rom
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ADATA SU635 Rev: 0A0 Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: SK hynix SC311 S Rev: 0P10 Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: ASUS Model: DRW-24B1ST c Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 05
Host: scsi5 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD20PURZ-85G Rev: 0A80 Type: Direct-Access ANSI SCSI revision: 05I'm open to any suggestions, thank you.
2 Reset to default
